ไส้กรอง RO เมมเบรน 8 นิ้ว Vontron LP22-8040 NSF ไส้กรองอุตสาหกรรม
ไส้กรอง RO เมมเบรน 8 นิ้ว Vontron LP22-8040 NSF ไส้กรองอุตสาหกรรม เป็นเมมเบรนโพลีเอไมด์คอมโพสิตฟิล์มบาง เป็นรุ่น Low Pressure สำหรับการกรองน้ำแบบ Reverse Osmosis เป็นไส้กรองที่ใช้กรองน้ำกร่อยได้ สามารถกรอง เกลือ ความกระด้าง และ สิ่งเจือปนที่ละลายอยู่ในน้ำ กำลังผลิตประมาณ 24,000 ลิตรต่อวัน ที่แรงดันต่ำ ทำให้ใช้ไฟฟ้าในการผลิตน้อย ใช้งานที่แรงดัน 225 PSI เส้นผ่านศูนย์กลาง 8 นิ้ว ความยาว 40″
รายละเอียดสินค้า
– ผลิตจาก Polyamide (PA) ทนต่อสารเคมีและการกัดกร่อน
– ขนาดไส้กรองน้ำ 8 x 40 นิ้ว กรองละเอียดถึง 0.0001 ไมครอน
– สามารถกรองสิ่งสกปรก และสารละลายในน้ำได้ถึง 99.7%
– กำลังการผลิต 24,000 ลิตรต่อวัน ประมาณ 1,000 ลิตร/ชั่วโมง (อาจจะมากกว่า เพราะขึ้นกับแรงดันของปั๊มผลิต และการตั้งค่าเครื่อง)
– เหมาะสำหรับกรองน้ำประปา น้ำบาดาล ที่มีค่า TDS ไม่เกิน 2,000 ppm
– ใช้งานที่แรงดัน 225 psi
– หนัก 14 กิโลกรัม
– ใช้กับเครื่องกรอง RO ขนาด 24Q, 48Q, 60Q, 72Q
– สภาพน้ำที่เหมาะสม : ทั้งน้ำประปา น้ำบาดาล และน้ำกร่อย
สินค้าที่มีคุณสมบัติใกล้เคียง —> ไส้กรองน้ำเมมเบรน 8 นิ้ว
หมายเหตุ :
– ทางบริษัทมีช่างที่ชำนาญ เกี่ยวกับการติดตั้งพร้อมให้บริการ ในราคาค่าบริการเริ่มต้น 1,500 บาท/ไส้ ทั้งนี้ขึ้นกับพื้นที่หน้างานของลูกค้า (ถ้าไกลจากบริษัท ค่าบริการจะแพงขึ้นตามระยะทาง)
– ราคาที่เสนอรวมค่าบริการจัดส่งทั้วประเทศแล้ว
– กรณีต้องการให้เก็บเงินปลายทาง +5%
– มารับสินค้าเองที่หน้าร้านมีสวนลดเพิ่ม
Product Presentation
Low Pressure Series is primarily used in desalination of brackish water. This series features low operating pressure, high permeate flow and rejection. It has high performance in rejecting soluble salt, TOC and SiO2 , and can be widely applied in pure water production in electricity and electronic industries.
Application
– Industrial pure water production, for example: electric power, steel, chemical industry, etc.
– Desalination of drinking water, for example: purewater, packaged water.
Product Performance
1、Operating pressure 225 psi (1.55 MPa) 2000 mg/L NaCl solution Temperature at 25℃ pH 7.0 ± 0.5 Recovery rate at 15%
2、Each membrane element may have ±15% variation of permeate flow.
Operating Conditions & Limits
Maximum operating pressure psi(MPa) 600(4.14)
Maximum feedwater temperature ℃ 45
Maximum inlet flow rate m3/h 17
Maximum concentration of free chlorine mg/L 0.1
Maximum pressure drop per element psi(MPa) 15(0.1)
Allowed pH range for feedwater in operation 2-11
Allowed pH range for chemical cleaning 1-13
Maximum feedwater flow SDI15 5
Important information
– Before the membrane element leaves the factory, The dry membrane element hasnopreservation solution, The wet membrane element has 1.0% sodium bisulfite (in winter, add 10% of propylene glycol antifreeze) as the preservation solution for storage treatment and use vacuum packaging.
– Dry membrane elements should always be maintained wet after Soaking; whenwet membrane elements are not used for a long time, preservation solution is neededtosoakthe elements.
– When the membrane element is used for the first time, it is recommended to flushit first for 15-25 minutes at low pressure (not suitable for soaking or soaking overnight), andthenflush it for 60-90 minutes at high pressure (the water flow should not be less than 50%of the system design water flow).
– The permeate water and concentrated water within the first hour of the initial operationof the membrane element should all be discharged.
– The operating limits and operational guidelines given in this technical informationarepart of the limitations of the three-year warranty on the membrane element.
– The addition of any chemicals that may affect the membrane element during storageand operation is prohibited, and Vontron Technology will not be liable for anyconsequences arising from the use of such chemicals.
– Please refer to the Product Manual for details on installation, commissioning, storage, and transportation of membrane elements.

